Product Description
By choosing various processing technologies, DQ Diamond provides PDC Oil Bit Gas Cutter has balanced wear resistance and impact resistance with 2.5mm diamond layer, suitable for different application scenarios, achieving a comprehensive balance between cost and benefit. Currently, DQ Diamond offers high wear-resistant, high impact-resistant, diamond layer thickened, comprehensive, and economical etc. series of PDC Oil Bit Gas Cutter to meet various engineering needs.
Product Characteristics
1. Excellent wear resistance and long service life, capable of continuously cutting highly abrasive formations such as quartz sandstone and granite.
2. PDC Oil Bit Gas Cutter has high compressive strength and cutting stability.
3. The thickness of the diamond layer is approximately 2.5.
4. PDC Oil Bit Gas Cutter with outstanding cost performance that is widely welcomed by customers.
Hot Tags: PDC oil gas bit cutter, China PDC oil gas bit cutter manufacturers, factory
Product Specifications
|
Product No. |
Diameter (mm) |
Height (mm) |
Diamond thickness/mm |
Diamond Chamfer/mm |
TC Chamfer/mm |
|
0808 |
8.0±0.03 |
8.0±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1008 |
10.00±0.03 |
8.0±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1013 |
10.00±0.03 |
13.2±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1308 |
13.44±0.03 |
8.0±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1313 |
13.44±0.03 |
13.2±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1320 |
13.44±0.03 |
20.0±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1613 |
15.88±0.03 |
13.20±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1616 |
15.88±0.03 |
16.31±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1913 |
19.05±0.03 |
13.20±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1916 |
19.05±0.03 |
16.31±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
|
1919 |
19.05±0.03 |
19.00±0.05 |
2.5±0.2 |
0.40±0.05 |
0.76±0.05 |
Advantages
1. The wear tolerance of the 2.5mm diamond layer of PDC Oil Bit Gas Cutter has been increased by more than 60%.
2. The PDC Oil Bit Gas Cutter's grain design has been optimized to form a gradient protection, reducing the cutting depth of abrasive particles by 30%.
3. The thick diamond layer and the cemented carbide substrate form the PDC Oil Bit Gas Cutter load-bearing structure, resulting in a more uniform stress distribution under drilling pressure load.
4. The thickness of the diamond layer has been increased, significantly enhancing the resistance to micro-crack propagation in hard formations and greatly improving the edge integrity retention rate of the cutting teeth.
5. The economic efficiency has been significantly improved, increasing the single run footage and reducing the overall cost.
Suitable for alternating hard, brittle, and rather more abrasive formations, medium to high conglomerate formations, fault fracture zones, and fracture development zones (shale gas, deep ocean, geothermal drilling etc.)
PDC Cutter showing
